What's the relationship between Raycus laser and S&A water chiller?
Rayus is a company mainly engaged in the development, production and
sales of fiber laser and the key components and materials, while S&A
is a manufacturer specialized in the production of industrial water
chiller. S&A can provide a wide variety of water chillers to meet
the cooling requirement of Rayus fiber laser. Actually S&A dual
temperature water chiller is a better match for Rayus fiber laser.
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength. Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com
S&A CW-6000 dual temperature water chiller can provide cooling for 300W-500W fiber laser;
S&A CW-6100 dual temperature water chiller can provide cooling for 700W-800W fiber laser;
S&A CW-6200 dual temperature water chiller can provide cooling for 1000W-2000W fiber laser;
S&A CW-7300 dual temperature water chiller can provide cooling for 3000W fiber laser;
S&A CW-7800 dual temperature water chiller can provide cooling for 4000W-6000W fiber laser;
Purposely designed for fiber lasers and with the acquisition of utility model patent certificate,
S&A dual temperature water chiller has the following features for the cooling of fiber lasers:
1. Equipped with two independent temperature control systems to separate
the high and low temperature. Low temperature serves to cool the main
body of laser, while the normal temperature serves to cool the QBH
connector (or lens) to effectively prevent the formation of condensate
water;
2. Equipped with a triple filter unit, where two wire-wound filters are
separately used to filter the impurities in the cooling water circuits
at the high temperature and the low temperature end to guarantee the
cleanness of water, while the third deionization filter mainly serves to
filter out the ions in the water circuits to better protect the fiber
laser.
As the center of an industrial water chiller, the quality of condenser
is of great importance. S&A has invested millions of money in the
condenser production equipment and made strict control on a series of
processes, including fins, bends and welding etc. to secure the quality
of condenser. Also with the introduction of welding robots, the welding
procedure has been significantly improved and perfected, which has
efficiently prevented the machinery breakdown caused by solder skips to
better secure the stable quality of S&A water chiller.
The technical parameter of CW-7800: http://Products/ChillerCW780019KWref.html
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.