After the 95th Buyi guy: Excavator, I only recognize Shantui
"In my mind, Shantui excavator's products and services are very good. Especially the service, it is a minute to say that minutes, after all, Anshun is far from the Ziyun side, but the morning call will definitely be able to To." Recently, Shantui excavator “Summer to cool†activity went into Anshun City, Guizhou Province. The author followed the staff of Shantui Guizhou Office and the service staff of Shantui Agent Guizhou Shanjian Construction Machinery Co., Ltd. to visit Anshun City. Luo Guangyue, a user of Pingzhai Village, Maoying Town, Ziyun County, when the author talked with him about the mountain excavator, he was full of praise. Shantui excavator "cool in the summer" visits Bo boss Born in 1995, Luo Guangyue was a Buyi. At the age of 18, he went to Guangzhou alone with his dreams, but the reality of "bone feeling" made him frustrated. When the father distressed his son, he called Luo Guangyue back to his hometown and learned to open the excavator with the master. "At the time, I didn't understand anything. The brand and quality of the excavator didn't even understand. Later, I tried the machine of Shantui. The reaction was very fast and I was very excited. I bought a mountain excavator." After the teacher, Luo Guangyue had the idea of ​​buying an excavator to start a business. With the help of his father and uncle, he bought a Shantui 138 excavator from the factory to open the road to prosperity. "When I bought an excavator, I was one on this mine. It was very popular and I couldn’t finish my work." Luo Guangyue and his mountain push excavator Luo Guangyue is mainly engaged in mining work, and has high requirements on the stability of excavators. I did not expect that the performance and quality of the Taishan excavator are “reliableâ€, which gives him a better understanding and trust in Shantui’s brand. In the following five years, he successively purchased the 228, 258, SE215-9, and SE245LC-9 four-mountain push excavators. "The performance of these five machines has been very good, and there have been no major problems. There are no problems like hydraulic pumps and engines. The 228 has been used for more than 17,000 hours now, and there have been no major problems." In the words of Luo’s boss, “No problem is fake, and normal wear and tear is definitely there.†But with high-quality and fast after-sales service, every problem is timely and accurately processed, and it does not affect Luo’s construction progress. . During the night construction process, the 138 drive belt broke, and Luo boss called the service phone. I didn't expect that in order to not delay the construction, the service staff at 4 o'clock in the morning would come to the door for repair. "Now the cost of excavators is very transparent, the competition is fierce, and one day can't be delayed. I really didn't expect them to come so early, and didn't delay my car work." Shantui service personnel maintenance equipment, cleaning filter With the quality and service of the Shantui excavator, Luo’s business has grown bigger and the number of excavators has increased from one to five. The driver is not easy to find, Luo boss encouraged the students in the surrounding village to learn the excavator, and then arranged for them to help themselves open the excavator. When I learned that my uncle wanted to buy an excavator, I recommended Shantui to my uncle. Luo Guangyue’s uncle also bought two SE215-9s. "Ask me how much I have earned, mainly because I have saved a few 'tanks'." "If you add equipment in the next step, you must still buy a mountain push. Of course, I will also recommend Shantui to my friends. If you have money, you can earn it together!" The story between Luo Guangyue and the Shantui excavator, which he dubbed as a "tank", is much more than that. As a post-95s, the road to prosperity is just getting started. As the investment in infrastructure construction in Ziyun County increases, There is a broader "money way" waiting for him and his mountain push excavator.
1.Welding materials
In
Welding, substances called filler materials or consumables are used. As the
name implies, these substances provide filler or a body of molten materials
that provides a strong bond to be formed between the base metals used. Most
welding processes will also require some form of shielding to protect both the
main components and filler from being oxidized during the process.
The
type of welding materials used during welding depends on the nature of the job
intended. Electrodes draw the necessary energy in order to perform welding
applications. Luoyang Golden Egret Company has any kind of welding materials
include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod,
Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.
Welding
can be applied in different kinds of industries such as building and
construction, oil and gas, marine, power generation, steel, mine tools,
automobile, transportation and etc.
2. Welding rod
1)Cast tungsten carbide based tubular
rod
The
hard phase of the rod is cast tungsten carbide which leads to higher hardness
and better wear-resistance.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65
Mainly
used for Mining machinery, Geological tools, Petroleum drilling tools etc, by
Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GT1103
(CTC, 60-80 mesh),
GT1103-1(CTC, 20-30 um),
GT1103-2(CTC,
40-60 um)
2)The hard phase of tube rod is carbide
pellets which leads to higher impact resistance and better wear resistance than
CTC cloase rod.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65 wear test.
Mainly
used for mining machinery. Geological tools etc; by Oxy-acetylene with weak
carburizing flame.
Product recommendation:
GT2102 (Cemented carbide grit, 30-60mesh)
GT2102-2(Cemented carbide grit, 30-40mesh)
GT2102-3(Cemented carbide grit, 40-60mesh)
3)Tube rod is composited by Cemented carbide
pellets, Spherical CTC and CTC. The layer has higher impact resistance, better
wear resistance and good fluidity than other rods.
Wear resistance: the wear resistance is 6-7
times better than others. Tested by ASTM G65.
Mainly used for oil method drill bits, such as
Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT3302 (carbide pellets, 20-40mesh)
GT3302-1(carbide pellets, 14-40um)
4)The hard phase of the rod is monocrystal WC,
the welding layer has a higher wear resistance and better impact resistance.
The wear resistance is 6-7 times better than
others, tested by ASTM G65 method.
Mainly used for the repair and strength for oil
drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT4104 (Monocrystal WC, 80-200mesh)
3. Welding Rope
Made
form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The
CTC is in spherical or irregular with good wear resistance; the nickel alloy is
in spherical or nearly spherical shape with good wettability and erosion
resistance and better corrosion resistance than tubular rod.
Recommend
to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice,
Coal drill pipe, Tunnel drilling machinery etc.
By
Oxy-Acetylene Welding with weak carburizing flame.
Product
recommendation:
GS110450N
(CTC, 4mm, HRC 47-55)
GS110550N
(CTC, 5mm, HRC 47-55)
GS110650N
(CTC, 6mm, HRC 47-55)
4. Welding Bar
The
rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is
in irregular or spherical shape with better wear resistance and the nickel
alloy is in spherical or nearly spherical shape and has good wettability with cast
tungsten carbide. The cladding layer has a higher impact resistance and better
wear resistance.
Its
wear resistance and corrosion resistance is between tube rod and flexible rope.
Mainly
used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner
drill stem and Mechanical parts of Tunnel rock drill machine etc.
Welded
by Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GD4025253-3(CTC, SCTC, 4*600/6*600)
GD4030303-3(CTC,
SCTC, 4*600/6*600)
5. Welding wire
Intensified molybdenum titanium vanadium
composite chromium carbide welding wire can improve layer`s bonding strength
and tenacity. This wire can use for multilayer welding which has no peel off,
and it can maintain good wear resistance under certain impact working condition.
Product recommendation:GSQD671Mo-4(1.6mm)
Medium carbon and high chromium wear resistance welding wire has a higher
hardness, stronger wear resistance, and excellent toughness by adding a certain
amount of molybdenum alloys and boride. It has a better impact resistance and
strip resistance than high chromium cast iron type materials
Product recommendation: GSQD621Mo-4(1.6mm)
With
high sphericity & excellent alloy organization, cemented carbide pellet is
mainly used in welding, as an adding material of PTA Powder , tubular welding
rod, to improve the wear resistance of the workpieces greatly.
Product recommendation: GQ06
Cemented
carbide grit with different percent of cobalt has good abrasive resistance and
is widely used for making grinding, polishing and cutting tools.
Product
recommendation: GS08A
Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.xtclasercladding.com
