What is the reason why the dehumidifying dryer can not dry the material normally?
Tube cutting machines are used for cutting long metal stock or scrap, generally where accuracy is not an important consideration, and the size or shape of the material makes other cutting or shearing options (such as a cutting torch) impractical. Alligator shears are often used in conjunction with large metal shredders in the metal recycling industry, to [clean" or prepare scrap for shredding by removing unwanted fittings and other parts the Shredder will not accept.
Aluminum Tubes Shear, Steel Tubes Shear, Iron Tubes Shear, Metal Tubes Shear, Copper Tubes Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycle.com
The reasons why the dehumidifying dryer can not dry the material normally are as follows:
1. The waste heat flue gas with a temperature less than 350 °C can not be used as a heat source for drying materials.
2. The phenomenon that the particle size of the material becomes larger during the drying process cannot be solved, which greatly affects the material effect.
3. There are widespread problems such as large loss of heat loss, low thermal efficiency, high coal consumption, difficulty in controlling the moisture of the discharge, and low relative production.
4. The dehumidification dryer does not use the automatic microcomputer detection and control system, and can not accurately detect and control the materials, wind, coal, etc. in time, resulting in the drying system not being able to play.
5, can not adapt to the drying of materials containing crystal water, can not adapt to the drying of high moisture materials.