The problem of the HVAC system can be known that any small problem of the air conditioning system can be amplified, thus affecting the normal operation of the entire air conditioning system and the human feeling. From the design aspect, it is necessary to refine the design plan. In the design, it is necessary to fully consider the cooperation with other professions, and carry out comprehensive arrangement, so that the effect of the air conditioning system can be better achieved, and the position where the problem is easy to be explained in detail. To prevent construction errors, the air outlets of the above problems should be placed on the wall. As a result, the drawings are on the ceiling, which greatly reduces the effect. For this reason, it is necessary to design the design from the beginning, and the design requirements are higher, and it is not only to meet the layout on the drawing.

For the construction, the pre-control, process control and post-control in the construction process need to be carefully managed to effectively prevent air leakage and damage. To protect the finished product, it is necessary to strictly follow the technical requirements for construction and acceptance to meet the later stage. The requirements for use, the office building project is completed in the conditions of the construction period, the quality of the project can not be effectively controlled, resulting in poor air conditioning system, so to reject the unreasonable construction period requirements of Party A, quality and quantity, in order to be more Good use lays a solid foundation.

Idler Roller

Product Scope:

Dia (mm): 63.5, 76, 89, 102, 108, 114, 127, 133, 140, 152, 159, 168, 178, 194, 219
Length (mm): 170-2800
Executive Standard: GB/DIN/CEMA/SABS/JIS
Advantage: Our rollers enjoy minimum revolving resistance, low vibration and noise, good concentricity, long lifetime, low maintenance cost and high loading capacity.

Material:

Tube: High-precision ERW, welded with DIN2394 Standard
Shaft: Cold drawn steel in accordance with DIN17100 and other equivalent standard, ISO h6 precision
Bearing housing: Cold pressing working, ISO M7
Seals: Labyrinth seal, Nylon 6
Bearing: Deep groove ball bearing C3 clearance
Painting: Ordinary painting, hot galvanized painting, electric static spraying painting, baked painting, Epoxy painting

Idler Roller,Rubber Disc Roller,Impact Cushion Roller,Conveyor Rollers Return Roller

Hebei Juxin Conveyor Engineering Co., Ltd , https://www.juxinconveyor.com