Rain and fog weather driving liberation tanker considerations
The degree of commercialization in China is getting higher and higher, and the economic and trade development speed is getting faster and faster. The oil trade can be said to be a large part of this, and oil tankers will naturally be indispensable in the transportation and trading of petroleum. The liberation tanker transports oil and its derivatives on the expressway all the year round. During transport, it will inevitably encounter some bad weather. In fact, driving a tank car itself has certain risks, so it is in special weather. Driving a tanker is even more careful, and it will be followed by a summary of specific driving considerations! There is more rainfall in this season, so first of all, let's take a look at what to pay attention to when driving a liberated tanker in rainy weather. When driving a car in rainy weather, we must control the speed of the car. Not more than 35 kilometers per hour, the braking effect is easily affected in the rain, so it is necessary for the driver to keep a low speed. Especially when driving on a high speed road, it is often best to step on the brake pedal lightly to check it, and be sure to avoid emergency braking and emergency turning when it rains, otherwise it is likely to cause a side slip and cause a flick. Second, it is also necessary to be careful when driving a liberation tanker in some heavy fog weather. It is best to keep the fog lamp lit while keeping the speed at a low speed. In the process of driving, we must maintain a high degree of attention, and at the same time pay attention to the front road center line and the taillights of the vehicles, etc., marking the visibility of the more serious fog, it is recommended that the driver is best to stop driving, parking the tanker After a safer place, turn on the four lights around the front and rear to remind people. Finally, drivers of liberation tank trucks must be reminded to park their vehicles in strict accordance with the regulations. Do not park the vehicle near flammable materials such as withered grass. Otherwise, the high temperature of the exhaust pipe may cause the withered grass. A tanker that encounters an open flame may explode, so be sure to pay more attention!
Computer Numeric Control (CNC) is the
automation of machine tools that are operated by precisely programmed commands
encoded on a storage medium (computer command module, usually located on the
device, see picture right-->) as opposed to controlled manually by hand
wheels or levers, or mechanically automated by cams alone. Most NC today is
computer (or computerized) numerical control (CNC), in which computers play an
integral part of the control.
We develop the Cnc Stainless Steel Parts
Stainless steel does not readily corrode,
rust or stain with water as ordinary steel does. However, it is not fully
stain-proof in low-oxygen, high-salinity, or poor air-circulation environments.
There are different grades and surface finishes of stainless steel to suit the
environment the alloy must endure. Stainless steel is used where both the properties
of steel and corrosion resistance are required.
Stainless steel differs from carbon steel
by the amount of chromium present. Unprotected carbon steel rusts readily when
exposed to air and moisture. This iron oxide film (the rust) is active and accelerates
corrosion by forming more iron oxide; and, because of the greater volume of the
iron oxide, this tends to flake and fall away. Stainless steels contain
sufficient chromium to form a passive film of chromium oxide, which prevents
further surface corrosion by blocking oxygen diffusion to the steel surface and
blocks corrosion from spreading into the metal's internal structure.
Passivation occurs only if the proportion of chromium is high enough and oxygen
is present.
B.
Main particulars
MAIN
PARTICULARS
Material
Stainless
steel(201,304,316-)
Standard
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
Certificate
ISO9001
Tolerance
Up
to +/- 0.002mm
Dimension
As
per drawing, as large as we can
Processing
CNC
turning, CNC turning and milling compound processing, 3/4/5 axis CNC
machining center, wire-cutting, EDM, grinding etc.
Finishing
surface
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
Marking
as
per clients` requirements
Inspection
material,
construction, dimension, heat treatment, hardness, NDT
Quality
ISO9001,
PPAP control production
Lead
time
3-20
days for sample, consult with customer for mass production
Delivery
Express
for sample, ocean shipping/air for mass production
Our
Capabilities
CNC
machining, CNC center machining, drilling, milling, turning, grinding,
tapping, boring
Engineering
& manufacturing services
R&D
process, tooling and gauging design, product design
Integrated
CAD/CAM system, test and measuring
Others
Recyclable,
in line with environmental requirements and standards, and reliable
C.
Construction
Construction
by machining
D
Workmanship
The
workmanship have good production practice. Care are taken to ensure High
accuracy and smooth surfaces
E.
Certificates
-
Material certificates
-
Measuring reports
-
Inspection protocol
-
NDT reports
-
Fixed certificate: ISO9001 certificate
Our
service
Besides
above the general specifications, we can also supply some specific machining
parts as clients' requirements.
Package
and shipping
Export
cartons, pallets, wooden cases, Polybags
container
package and container transportation
Steel Machining Parts,Precision Cnc Metal Machining,Stainless Steel Machine Parts,Cnc Metal Machining Shinvast Industry Ltd , http://www.shinvastindustry.com