LED downstream market adds new power to the industry chain
Conveyor components are essential spare parts of conveyor system. There are many types of conveyors are available, such as screw, chain and pneumatic. The most commonly used is the belt conveyor. Belt conveyors are the backbone of bulk material handling systems in many different processing plants. These systems use carts or trains to carry heavy materials like rocks or metal. Such as bulk material handling conveyor or bulk conveyor. The main function of a bulk conveyor system is to continuously transport and supply bulk materials to units in processing plants. Secondary functions include storage and blending.
Please see the structure of typical bulk conveyor below:
Raw materials (such as bulk solids and powders) are received from trucks, ships or trains. Then they are unloaded to a yard or storage facility, often using a conveyor system. At either end of the conveyor, the belt wraps around a pulley. To maintain reliability, the principal belt conveyor components – such as idlers, rollers, pulleys, bearings, shafts and belts – must operate under dynamic loads and harsh conditions.
Main Conveyor Components of US:
Conveyor Idler Seal
Shaft
Deep Groove Ball Bearing with C3 C4 clearance
IDLER
Comb Idler
Taper Idler
Flat Idler
Friction Idler
Guide Idler
Impact Idler
Return Idler
Self-aligning Idler
Spiral Idler
Troughing Idler
Transition Idler
PULLEY
Bend Pulley
Driving Pulley
Head Pulley
Rubber Outset Pulley
Snub Pulley
Standard Pulley
Tail Pulley
Take Up Pulley
Our manufacturer XKTE offers a wild range of conveyor components to meet your application requirements. such as Ball Bearing for idler rollers, Conveyor Idler bearing housing, Seals and shaft for conveyor roller, roller bearing for Conveyor Pulley , and some other pulley components. we have the parts to optimize your bulk conveyor system.
Conveyor Components,Conveyor Accessories,Belt Conveyor Components,Bulk Conveyor Components Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
Continuing the hot market last year, the LED industry was popular in the capital market. The logic behind market speculation is that the United States has banned incandescent lamps since 2014, and LED lighting is expected to replicate last year's European market. Industry people admit that the US sales channels are different from domestic ones, and market development is not easy. Despite this, Sun Yong, general manager of Sunshine Lighting, is still optimistic: in 2014, the industry's profits increased by at least 20.
The performance of the company will double in 2013, LED lighting products shine in the field of commercial lighting and home lighting, LED indoor lighting applications for the first time beyond outdoor landscape lighting, with a growth rate of more than 80. The hot field in the downstream lighting industry also benefits the middle and upper reaches of the LED industry chain.
This year, commercial lighting will bear fruit and home lighting will start quickly. Guan Yong is full of confidence in this year's market at the high-tech production and research industry investment strategy meeting. He believes that the opening of the downstream market will bring huge profits to the entire industry chain, and the overcapacity of upstream chips has been effectively alleviated.
In the past few years, various local governments have introduced subsidies for the import of LED epitaxial chip production equipment, resulting in a large number of outsourced production equipment for upstream chip manufacturers, resulting in oversupply of local low-power chips in the Lions. However, last year, the LED lighting market started and digested some of its production capacity. At present, the chip market is basically balanced. Zhang Xiaofei, president of Gaogong LED, said in an interview.
Under this situation, Sanan Optoelectronics, a leading domestic chip manufacturer, recently launched a private placement of funds to double its original capacity.
For a good company, the profit in 2014 should at least double, and companies with a profit growth rate of only 50 may have problems. Guan Yong believes that the LED sector in the capital market experienced a round of growth last year, and most listed companies can fulfill market expectations this year. However, under the general trend of industry consolidation, small enterprises with weak financial strength will have a crisis.
The traditional packaging manufacturers face the crisis Ruifeng Optoelectronics Technical Director Xiao Xiaoming pre-existed the crisis of industry integration, but he believes that the crisis is not from funds but technological changes.
With the transformation of packaging technology, traditional packaging companies will face a crisis of survival. Yan Xiaoming said that chip-level packaging technology is beginning to emerge in the industry. After this technology matures, upstream chip manufacturers may directly skip package manufacturers to provide lamp beads to downstream application vendors. Midstream traditional package manufacturers will be short-circuited.
The integration of chip manufacturers and packaging manufacturers is an inevitable trend in the industry. Yan Xiaoming believes that some manufacturers have begun to try to integrate the midstream of the industry chain, and some enterprises even have the integration of the entire industry chain. For example, chip maker Tongfang shares recently acquired Hong Kong stock company Zhen Mingli and expanded downstream.
Guan Yong believes that the real purpose of Tongfang’s acquisition of Zhen Mingli is to take a fancy to the company’s sales channels in overseas markets. The company’s lighting products once occupied the overseas market.
When talking about the US market, Guan Yong said frankly: The US sales channel is mainly supermarkets, and domestic brands are difficult to enter the United States. At present, in the US market, the old lighting brands such as Philips and Osram are still relatively strong, and the LED lighting companies are also more prominent.
Domestic companies enter the US market, mainly based on OEM. Analysts believe that the foundry model is the process of shifting US LED lighting production capacity to China. Although the profit margin is low, there is still room. 
The structure of a roller conveyor consists of a series of tubes mounted at set intervals. Designed for continuous operation, a belt conveyor can be used in a wide range of capacities and distances, and its length can be a few meters or tens of kilometers.