Kinkai Fruit and Vegetable Dryer with Dehumidify 50L/H
September 19 14:16:06, 2020
Model NO.: JK03RD / JK06RD / JK12RD
Drying Type: Hor Air Circulating
Drying Capacity: 200~2500kg Per Batch
Dehumidify: 50 L/H
Drying Temperature: 10~75c
Control System: Touch Screen Operation
Patent Technology: Second Waste Heat Recovery Patent Technology
Trademark: KINKAI
Transport Package: Plywood Cases
Specification: 1760x1060x1280mm
Origin: China
HS Code: 8419310000
KINKAI Heat Pump Fruit And Vegetable Dryer Introduction KINKAI Heat pump fruit and vegetable dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Functions: Heating drying max temp 75C Cooling drying min temp 8C Heating +dehumidify drying
Technical Parameters
Double Dryers + Drying Chamber
Model
Unit
JK03RD (x2)
JK06RD (x2)
JK12RD (x2)
Power Input
KW
9.6
17
30
Power Supply
V/PH/HZ
380V/3PH, 50/60HZ
380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current
A
19.2A(380V), 44A(220V)
34
60
Heating Capacity
KW
21
42
84
Cooling Capacity
KW
15.6
36
64
Dehumidify
L/H
24
50
100
Max. Temperature
ºC
≤75
≤75
≤75
Working Condition
ºC
0-43
0-43
0-43
Electric Shock Protection Grade
I
I
I
Max. Exhause Pressure
Mpa
3
3
3
Noise
dB(A)
≤75
≤75
≤75
Power Consumption/ H
KWH
9.6
17
30
Electric Heater
KW
6
12
24
Blowing Type
/
Horizontal Blowing 360ºC
Dimension Of Dryer
MM
1675x860x1280
1760x1060x1280
2120x1360x1590
Weight
KG
295x2
385x2
540x2
Recommend Dryer+Drying Chamber Sizes
Description
Drying Chamber Size (Can Be Adjustable)
Single JK03RD Dryer + Drying Chamber
4000x2000x2200mm
Single JK06RD Dryer + Drying Chamber
6000x2800x2200mm
Single JK12RD Dryer + Drying Chamber
6000x3000x2200mm
Double JK03RD Dryers + Drying Chamber
7000x2000x2200mm
Double JK06RD Dryers + Drying Chamber
10000x2800x2200mm
Double JK12RD Dryers + Drying ChamberÂ
10000x3000x2200mm
Features of KINKAI Fruit And Vegetable Dryer 1, Energy saving Adopt heat pump technology, absorb heat from air and recovery waste heat at the same time Adopt close dehumidify + circulating drying type, saving operating cost;  2, Exact control temperature and humidity The drying temperature can be easily controlled by PLC +Touch Screen control system.  3, Uniform drying By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly  4, The temperature: 10-75°C, Max 75°C, similar nature drying.  5, The baking plate dimensions and materials can customize as customer request.  6, Good drying quality. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;  7, Safe and reliable operation Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Package and Delivery For heat pump dryer parts---with plywood For drying chamber +trolleys  If shipped with 20ft container or 40ft container, no packing  If shipped with LCL( less than container load), packed in plywood
Â
The Xunda T400 and T200 is a multilayer coating system designed for the corrosion protection and mechanical protection of pipelines.
The T400 consists of three layers, the butyl rubber adhesive laminated on both side of the polyethylene film backing.
The T400 can be used as inner tape, T200 can be used as outer tape.