4′ Outlet QY Oil-Filled Submersible Pump Clean Water Pump(single stage)
September 06 22:01:51, 2024
Model NO.: QY SERIES
Max.Capacity: >400 L/min
Material: Cast Iron
Assembly: impeller
Start Up: Electric Pump
Application: Submersible Pump, Clarified Water Pump
Media: clean water
Theory: Centrifugal Pump
Transport Package: wooden box
Origin: Zhejiang, China
Max.Head: >150m
Driving Type: Motor
Structure: Single-stage Pump
Power: Electric
Type: Positive-Displacement Pump
Industry: Mechanical Pump
Performance: water pump
Trademark: KAILI
Specification: 3.0-20HP
HS Code: 8413709190
Product introduction
QY Oil-filled submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is three-phase is at the upper part of pump and seal is used where pump and motor combine, which is a kind of double end mechanical seal, O rings are applied to all static joints.
Application This series pumps because of wide range of flow and head, is extensively used for electrical irrigation, forest water spraying, pumping water from well, water tower deliver and urban construction water supply and discharge for farms, villages, industrial and mining enterprise.
Work conditions The pump can work properly and continuously under following operational conditions: 1) Medium is not corrosive .Sand contents should be max 0.10% by volume and granular size should be max. 0.20mm. 2) Medium temperature shouldn't be over 40ºC and PH should be 6.5-8.5. 3) The pupmps should be operated within rated head. 4) The pumps should be fully submerged into water with depth of less than 3m and max . The pump should be min. 0.5m over the water bottom and not be inserted into sludge . 5) Power frequency should be 50HZ,three-phase voltage 380V,and voltage fluctuation should be 0.9-1.1 times than the rated.
We are manufacturer of Bicycle Tire Repair Kit in China, if you want to buy Bike Puncture Repair Kit,Rubber Solution Adhesive,Bicycle Tube Repair Kit please contact us.
