Xiamen 1 ton electronic load balance disassembly precautions?
Square Carbide Insert,Square Carbide Turning Tool,Square Thread Carbide Inserts,Square Milling Inserts SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.sichuankenlarcutters.com
As long as it is not too serious, you can solve it yourself. However, one thing to note is that there are some things to pay attention to when disassembling an electronic scale. Otherwise, the problem of repairing an electronic scale that does not have too many failures itself will be more problematic.
The above are the main points to note, only the above points are done, the correct dismantling of the electronic platform. However, it should be reminded here that if serious problems with electronic scales cause problems that cannot be solved by themselves, do not force them to solve them by yourself. Make sure to ask professional and technical personnel to solve them. Otherwise, serious consequences may occur.
1: Disassemble the connecting screws between the two scales, vertical and horizontal; need to pay attention to distinguish.
2: Pack up the steel balls under the scale body, steel balls and steel pads and corresponding thin iron gaskets;
3: In the process of disassembly, we must also pay attention to fastening the corresponding sensor signal line to avoid crushing and breaking. Should avoid the weighing sensor colliding in the process of disassembly and lifting.
4: First of all, make preparations. Prepare some tools required for dismantling the electronic loadometer; if it is not ready to start construction, it is easy to dismantle the process of half-delay, resulting in structural instability and deformation.
5: The signal line of each load cell should be loosened from the junction box, and corresponding records should be made. This is to facilitate the installation in the original position of the junction box in the future installation. Otherwise, if the wrong position is installed, the status of the fault will be severe. The second thing to note is that the fault line must not be cut off, and the main line must be put away and put away;
With the increasing demand for floor scales recently, people are buying more and more electronic floor scales. Many people have always felt that if they encounter a fault, they would love to repair it by themselves. Because, if some minor problems are asked, the technicians who perform professional maintenance may consume more time, and the period of delay will be very long. One is above the funds. Faced with this, if users of electronic scales who are more familiar with weighing instruments, they can completely repair them manually.