For those of us who love cars, after buying a car, it is equivalent to having a second home. We will do our best to care for the car. Compared with raising children, it can be said that it is even worse. However, it is inevitable that there will be some misunderstandings in the course of car-carrying. If you do not correct it in time, you may have less effective results.

Misunderstanding 1: Must go to 4S shop before and after long-distance driving

Long-distance driving is a very pleasant thing, not only can ease all kinds of pressures, but also add fun to a dull life. Therefore, many of my friends will come from time to time on a self-driving tour, and before traveling, they will often go to the 4S shop to make routine checks before the trip, they think that the 4S shop inspection is the most insurance.

In fact, the owner of the vehicle before and after the self-driving tour can complete it completely. There is no need to go to the maintenance station. Simply put, the inspection items before the self-driving tour mainly include: light inspection, tire inspection, wiper inspection, and inspection of oil/liquid in the engine compartment; if you encounter bad road conditions during travel, you can go back when you return. 4S shop focused on checking the vehicle chassis.

Misunderstanding 2: The more oil/fluid is added, the better

Many car owners would think that it would be better to add more oil/liquids in the engine compartment to save the time when the book is used for a long time. Therefore, those owners will occasionally add these oils/liquids, such as glass, anti-freeze, and engine oil, aiming at more!

In fact, more and more good is not suitable anywhere. When adding oil, it is best to add it according to the standard value given in the service manual, because too much oil will cause the increase of carbon in the combustion chamber, and the engine power will be reduced; while in the glass, antifreeze and brake fluid In terms of adding, there are more intuitive tick marks on each liquid storage tank, and the added range can be maintained between the upper and lower limits.

Misunderstanding 3: The more expensive car film, the better?

The current car foil industry has huge profits, and the market is pros and cons. Some windshields require thousands or even tens of thousands of yuan. In fact, car owners do not need to spend high prices to the film, as long as the quality is qualified, quality assurance is a regular manufacturer of the brand The effect of the film is almost the same.

Misunderstanding 4: The higher the gasoline oil, the better the car

Some friends often have high standards and strict requirements for themselves in their daily lives, and the items they use are top-notch. Therefore, these friends are also trying to use high-grade gasoline as far as possible in the use of automotive items. Take petrol oils as an example. Some owners deliberately use high-grade gasoline for so-called car protection and performance enhancement.

In fact, this is totally unnecessary. The selection of the gasoline label is mainly based on the compression ratio of the engine, and the vehicle manual of each model also indicates the fuel label that matches the model. The owner only needs to follow the standard. The main reason is that if high-grade gasoline is used, not only will it cost more fuel, but it will also be difficult to achieve the advantages of high-grade labels.

Misunderstanding 5: Reluctant to open after buying a car

Although some people have become car owners, but usually "not willing" to drive, only to leave the car to go out to play when the holiday, in fact, this way of car is very hurt. Parts of the transmission such as the engine and the gearbox are rusted due to their direct contact with the air, and the battery will also affect the service life due to long-term natural discharge. The best way is to run the car every few days and run for thirty to forty minutes. In addition, it is always a short-distance car to hurt the car, the car is moving at any time but not far away, is an important reason for injury.

The on-board parts wear out the most during the start-up phase of the engine, and the electricity consumed to start a car battery also takes about 20 minutes to make up. This kind of car habits can easily make the car fall out of order early.

1 Color Pad Printer

Single color pad printing machine printer can print 1 color on uneven surface, no material limit, you can print on metal, glass, paper, cloth, wood, plastic and so on;

1 Color Pad Printer,Wooden Ruler Pad Printer,Mini Tampo Printer,Cloth Size Semiautomtic Pad Printer

Dongguan Hongyu Automation Technology Co. Ltd , https://www.cwprinter.com