Reasons for the idling of centrifugal pump and preventive measures
Here you can find the related products in Scented Candles, we are professional manufacturer of Candle Gift Set, Luxury Candles, Soy Wax Candles, Fragrance Candles, Aromatherapy Candles. We focused on international export product development, production and sales. We have improved quality control processes of Scented Candles to ensure each export qualified product. Scented Soy Wax Candles, Luxury Fragrance Candles, Aromatherapy Candles Gift Set Shijiazhuang Tabo Candles Sales Co., Ltd. , https://www.tabocandles.com
1, traffic congestion caused by equipment leakage
Insufficient reason: affecting the centrifugal pump discharge more straw gas leakage, bottom valve leakage; water inlet blockage; bottom valve into the water to try; centrifugal pump speed is too low; seal ring or impeller wear too large; suction height exceeds the standard.
Treatment method: check the suction pipe and the bottom valve, the plug leakage gas source; clean the water inlet of the sludge or plug; the depth of the bottom valve must be greater than 1.5 times the diameter of the inlet pipe, increase the depth of the bottom valve into the water; check the power supply voltage, increase The speed of the centrifugal pump, replace the seal ring or impeller; reduce the installation position of the centrifugal pump, or replace the high lift pump.
Like this situation is the lack of traffic in the centrifugal pump idling. The two filters are directly connected. The first is the filter bag filter, the second stage is the filter cotton core type, and the two matched filter pumps are the same as the power 2.2 kW (3 hp) centrifugal pump. When the filter from the filter of the syrup pump 1 is filtered to 2 filters, the flow rate will be reduced, so the medicinal agent is not enough. 2 Centrifugal pump in the filter, after working for a while, no. The slurry pump will be insufficient due to the flow of no water idling, which was caused by pump damage last fall.
There are two solutions to this situation.
First: No. 2 in the filter centrifugal pump open work, not only from no connection, the liquid is filtered directly. The barrel filter in 1 to 2.
Second: Yes, the two filters directly enter the double-tower filter, and the filter bag filter barrel uses a cotton-core filter barrel with a centrifugal pump.
2, start the centrifugal pump not filled with water, the slurry pump runs
Centrifugal pumps can not be filled with water, be sure to check the centrifugal pump that is filled with water before the centrifugal pump is pumped, and the centrifugal pump will be damaged by water.
3, the shredded card reduces efficiency in the impeller
If the card is stuck in the impeller, it will cause vibration and noise of the centrifugal pump, reduce the working efficiency, and reduce the flow that causes the pump to be damaged due to the idling of the centrifugal pump. Keep awake debris and keep the centrifugal pump running smoothly.
If you want to know more about the products in Scented Candles, please click the product details to view parameters, models, pictures, prices and other information about Scented Candles, Aroma Candles, Fragrance Candle, Candle Gift Set.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Scented Candles!