Nickel Alloy Monel 400 (UNS N04400) Flange with SGS
December 01 12:09:25, 2022
Origin: Jiangsu Baoying
HS Code: 7505120000
UNS N04400
DIN W. Nr. 2.4360, 2.4361
Â
Form
ASTM
Rod, bar and wire
B 164
Plate, sheet and strip
B 127, B 906
Seamless pipe and tube
B 165, B 829
Welded pipe
B 725, B 775
Welded tube
B 730, B 751
Welding fitting
B 366
Forging
B 564
Â
Chemical composition
%
Ni
Cu
Fe
C
Mn
Si
S
min
63.0
28.0
Â
Â
Â
Â
Â
max
Â
34.0
2.5
0.30
2.00
0.50
0.024 Â
Â
Physical properties
Density
8.80 g/cm3
Melting range
1300-1350ºC
Features: Monel 400 has excellent resistance to corrosion by many reducing media such as sulfuric and hydrochloric acids. It is generally more resistant to corrosion by oxidizing media than higher copper alloys. Monel 400 resists pitting and stress corrosion cracking in most fresh and industrial waters. It has good resistance in flowing seawater, but under stagnant conditions, pitting and crevice corrosion is induced. Monel 400 is probably the most resistant to hydrofluoric acid in all concentrations up to the boiling point, of all engineering alloys. Monel 400 is notable for its toughness, it does not show embrittlement tendency at cryogenic temperatures. It is work hardenable.
Company Profile: Test Equipment : Company strength: Certificate: Â Welcome to contact us,thanks
Our products sales all over the world as well. From the following two websites you can also get more information about our company: http://www.jsxdhj.cn/ http://xingda-alloy.en.made-in-china.com  Welcome to contact us,thanks
Stone crusher is suitable to crush the medium hardness and brittle material in the mining, cement, coal, metallurgy, building materials, highway, gasification and so on. It has the simple structure, high crushing Ratio, high production efficiency, and can be dry or wet crushing . The grate gap of the Stone Crusher can be adjusted according to user requirements to get the different final sizes to meet the different needs of different users. Stone Crusheris a necessary equipemnt for mining and quarry.
Features
1. High ratio of crushing;
2. Homogeneous final grain size
3. Simple structure
4. Reliable working condition
5. Easy maintenance
6. Low operating cost
Application
1. Small stone powder JAW Crusher is widely applied to crush high hardness, mid hardness and soft rocks and ores such as ore,quartz, granite,limestone,slags, construction materials, marble, etc...
2.The maximum compression strength of materials to be crushed is 320MPA.
3.PE series is used for primary crushing, and PEX series is used for secondary crushing and fine crushing.
Stone Crusher,Quarry Stone Crusher,Granite Stone Crusher,Mobile Stone Crusher Machine
