Komatsuyama pushes construction machinery special anti-corrosion lubricants listed
Chiller is a kind of water cooling equipment, is able to provide constant temperature, constant current, constant pressure cooling equipment. Cold water machine the principle is to a certain amount of water injection machine of the internal water tank, through the mechanism of cold water cooling system will be water cooling, and then have the machine within the cryogenic frozen water injection pump need to cooling equipment, cold water machine the internal heat away, the high temperature cooling of the hot water back into the water again, so exchange cooling cycle, as the function of the cooling equipment. Cooling-Water Machine,Water Cooled Ice Machine,Drinking Water Cooling Machine,Cooling Machine For Water Ningbo Haijing Plastic Machine Manufacturing Co. LTD , https://www.chinahaijing.com
In June 1994, Shantui invested heavily to establish Shantui Petrochemical Co., Ltd., and Shantui Petrochemical Co., Ltd. cooperated extensively with domestic and foreign senior scientific research institutions, and was committed to the research and development and production of oil for construction machinery, first producing oil for installation, and users reflected After switching to other brands of oil, the performance of the whole machine decreased, and it was required to purchase oil for installation. Therefore, the market-specific oil was introduced, which enabled the comprehensive performance of the Shantui bulldozer to be greatly exerted, and was widely praised by users, thus making the bulldozer Production and sales have increased year by year. With the introduction of excavators and loaders, it is found that the lubricating oil used in bulldozers is still insufficient in the overall performance of the whole machine when used on excavators and loaders, so it is devoted to the development of special oils for excavators and loaders. With the introduction of special oil for excavators and loaders, it has been widely praised by users. Therefore, Shantui Petrochemical Co., Ltd. was designated by China Construction Machinery Industry Association as the only oil production base for construction machinery in China in November 2003. Therefore, the special lubricants for the Shantui Komatsu bulldozer, excavator and loader series were launched, and they were randomly exported to Yemen, Australia and other countries. At the same time, many domestic OEM companies (engineering machinery manufacturers) also use a variety of special oils as their installed and service oil. The sales volume of various special oil products has doubled year by year. With the establishment of the Lubricant R&D Center of China Shantui Construction Machinery Research Institute in November 2006, combined with all kinds of information feedback from the market, we fully realized that all kinds of construction machinery not only have different structural characteristics, but also different working conditions. The working environment is different. There are many working environments that are rainy or humid, and inevitably come into contact with water and air. Generally, the lubricating oil anti-corrosion ability is difficult to meet the requirements of these working conditions and engineering machinery and equipment under the working environment. After more than two years of research and development and real-time simulation of comprehensive performance experiments, the researchers at the Lubricating Oil Research Center successfully introduced the corrosion-resistant series of lubricants that are more suitable for various working conditions and working environments of engineering machinery. The introduction of this series of lubricants will definitely make the comprehensive performance and service life of construction machinery equipment greatly improved and improved.