Jiangxi Province grain machinery drying rate reached 40%
FR4 G10 Epoxy Fiber Glass Parts
HONY Plastic is Professional factory manufacturing high quality CNC Machining 3240/FR4/G10/FR5/G11 materials insulating parts.
FR-4 and G-10 are the most versatile all-around of the laminate grades and are made by impregnating an epoxy resin binder into continuous glass woven fabric. Whether wet or dry, G10/FR4 has extremely high mechanical stability, superior dielectric loss properties, and good electric strength properties. As a result, G10 and FR4 are widely used in the electronics field; with water absorption measuring virtually zero, it is an excellent insulator. Differing between G10 and FR4, FR4 is a fire-retardant grade of G10 and can be safely substituted when G10 is called out. Oppositely, G10 can never be substituted when FR4 is called for.
Grade: G10/G11 Fiber Reinforced Composite
Colour: Sheets are supplied in green
Thickness: 0.80mm to 35mm
Subcategory: Epoxy; Filled/Reinforced Thermoset; Polymer; Thermoset
Description:
This glass-epoxy laminate is specified for its extremely high strength and high dimensional stability over temperature. G-11 is used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation. G-11 is difficult to cut or machine and may require special equipment.
G-10 is slightly Stronger while G-11 is a better insulator and can withstand higher temperature G-11 and similar fibreglass reinforced thermosets are sometimes known as Garolite.
HONY Plastic is an industry leader in FR4 and G10 machining. We are able to maintain tolerances, create features and produce parts that even the material manufacturers deem unobtainable. By using high speed spindles capable of turning at 30,000 RPM, tightly controlled work envelopes and cutting edge work holding systems, HONY Plastic can machine components from the most simple part to the most intricate part on any of the 35 machines in our facility.
27" x 15" x 13" Work Envelope
Tolerances to +/- .00025" (0.006 mm)
Hole Diameters to 0.003" (0.076 mm)
Fiber Glass Cnc Part,Fr4 Glass Epoxy Cutting Board,Fr4 Cnc Machined Parts,Epoxy Precision G10 Cnc Part Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com
Grain drying is a key link in the food production process and an important part of the mechanization of grain production. Mechanized drying technology artificially controls temperature and humidity, and reduces the grain moisture content without compromising the quality of grain. It is a drying technology that meets national safe storage standards. In recent years, in order to improve food quality, storability and processability, and accelerate the industrialization, intensification and modernization of agriculture, Jiangxi Province scientifically and reasonably determines the amount of subsidies for grain dryers and continues to increase subsidies for grain dryers. Guided the construction of drying centers on the basis of large grain farmers and farmers' professional cooperatives, and exerted the demonstration effect. Under the guidance and support of the national agricultural machinery purchase subsidy policy, the enthusiasm of Jiangxi farmers to purchase machines has been significantly improved, and the number of grain dryer subsidy machines has achieved “five consecutive increasesâ€. In the past three years, the subsidies for grain dryers in Jiangxi Province were 1,331 units (sets), 2,795 units (sets), and 3,971 units (sets), showing a gratifying momentum of leap-forward growth. Last year, the amount of mechanized dried grain in Jiangxi Province reached 8.64 million tons.
At present, the drying rate of grain machinery in Jiangxi Province has reached 40.65%, which is nearly double the national average mechanical drying ratio. It is at the leading level in the country. The mechanical drying of grain makes it unnecessary for farmers to look at the grain, which is very good for ensuring food quality. Great help.
