Improved automatic spray drying equipment simplifies the spraying process

December 06 19:08:15, 2023

There are many types of painting equipment, mainly for the surface painting of certain materials under a vertical conveyor belt conveyor, because the equipment has forced rotation equipment during the painting process, only the belt contact fixture, when the belt A looser position will cause some fixtures to rotate unsmoothly. At this time, the material will not rotate, causing uneven spraying and producing defective products. Because after painting, it is bound to have a set of drying device for drying by heat. Since the drying and drying process is very long, it usually takes about thirty minutes. The fixture is not easy to clean. It is vertical and its front end operation is very short. The group transfer device transfers the sprayed material from the original operation area to the drying device, and then is dried in an infrared drying oven. After that, the group of transfer devices is used to first retrieve the material to the original operation route, and At the end of the route, the completed finished material is dumped, and then the fixture is washed along the conveyor belt at the return position, and then the original clean-up material is returned to the original spraying area. After the material is removed, another cycle begins. This type of structure is a vertical relationship, which affects the integrity of the overall length, how to simplify the process, and provides more articles that meet actual needs. The inventor conducts research and development to solve problems that are easily caused by the existing use.

In order to overcome the above defects, Dong Xinchang Industrial Co., Ltd. Cai Jicheng invented a new type of improved automatic painting and drying equipment, which adopts the above-mentioned improved automatic painting and drying equipment, and fully automated the complete coating and drying process for spherical products. In the spraying and conveying stage, it can use the universal chain to make the fixtures up and down to clean the fixtures at the return return stage, and maintain the cleanliness to grip the spherical products, and it will not accumulate the new-style automatic coating machinery technology for paint and stained spherical products. , Minimize the amount of pollution to be sprayed, so that the pollution caused by spraying will not be brought to the drying cycle furnace.

Machine Parts Housing

Machinery shell with gearbox shell processing
Machinery for typical gearbox shell body parts, main processing plane and hole system, to ensure that the size of the hole in the process of machining precision and position accuracy, handle the relationship between hole and plane. Should follow the principle of surface before hole, namely first processing box on the datum plane, and then to datum plane positioning processing other plane, then processing hole system. Because of the planar area is large, with its positioning can ensure reliable positioning, clamping and firm, and therefore easy to guarantee machining precision holes. Secondly, cut off the casting surface uneven, create conditions to improve the machining precision of holes, facilitate and adjustment of the knife, is conducive to protect the cutting tool. Processing technology should also follow the principle of separate rough finish machining.



Machine Parts Housing,Aluminum Die Casting Machine Part Housing,Machinery Housing,Machinery Parts Transmission Housing

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.diecastingdie.com