High Pressure Gear Oil Pump, Fuel Pump, Oil Transfer Pump, Hydraulic Pump

Introduction:
1. Using magnetic coupling drive without leakage, 316 L stainless steel shell, PEEK materials gear, PTFE sealing materials, use brushless DC motor combination with smaller size, with built-in limit pressure valve, the flow rate can be realized without steps.
2. Pump can be used in the -0.1 Map20Map closed systems, the rated output pressure is 0.3 Mpa (medium: Water), the maximum output pressure is 1.4 Mpa, output flow rate with 50~3500 ml / min.
3. Widely used in hemodialysis machines, printing machine, pictorial machine, medicine, chemicals, water treatment, printing, cleaning, packaging, filling machines, food processing, and other areas of liquid delivery, particularly suitable for printing machine, pictorial machine, barcode machine.


Normal Parameters:
1. Altitude: ≤ 2500 M
2. Humidity environment: ≤ 85%
3. Fluid viscosity: 0 ~ 3000 CPS
4. Ambient temperature: -10 ~ 50 ° C
5. Fluid temperature: -10 ° C≤ T ≤ 100 ° C (except for the freezing)
6. Working way: Continuous working
7. Apply the media of: Acid and alkali, salt, organic solvents, oils.
8. Lifetime above 8000hours
Note: MG204XK "04" means the gear of the pump with the height of 4mm, "09" means 9mm, "13" means 13mm


OEM and ODM service are avaiable under your request.
The specifications only for reference, for details, please contact with us!

Extruded Graphite Block

Extruded Graphite is a type of isostatic pressure graphite, which is currently produced by the extrusion molding method commonly used in most carbon and graphite products.

Graphite Block,Carbon Graphite,Extruded Graphite Block,Applications For Molded Graphite

CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.carbongraphitepart.com