CO2 Welding Machine/Welder 220/380V MIG/Mag Inverter Welding Machine

Whats is MAG welding machine

Carbon dioxide gas shielded welding: for metal welding wire as a melting electrode, inert gas (CO2) as a protective arc welding method. Referred to as MAG.CO2 arc welding is a highly efficient welding method to CO2 gas as a protective gas, relying on the arc between the wire and weldment to melt the metal gas welding method called CO2 welding. This welding method are used to wire automatic wire, large amount of metal, high production efficiency, quality and stability. Therefore, widely used at home and abroad, compared with other electric arc welding has the following characteristics:
1, high production efficiency CO2 arc welding penetration, strong penetration, and high melting rate of wire, so deposition speed, production efficiency can be higher than the manual arc welding 3 times.
2, low cost of welding CO2 welding costs only 40% -50% of the cost of submerged arc welding and manual arc welding.
3, low energy consumption CO2 arc welding and skin electrode compared to 3mm thick steel butt welds, electricity consumption per meter weld 30% lower, 25mm steel butt welding 60% lower electricity consumption.
4, wide range of applications No matter what position can be welded, the sheet can be welded to 1mm, the most thick and almost unlimited (multi-layer welding). And welding speed, small deformation.
5, strong anti-rust weld low hydrogen content strong crack resistance.
6, after welding without slag, arc operation easy to monitor and control, is conducive to the welding process mechanization and automation

Welding machine(IGBT Inverter technology/ CO₂)

• IGBT Inverter technology, current mode control, stably quality and
• Reliable quality, stable performance
• closed-loop feedback, constant voltage, Anti- net voltage fluctuation
• reactor control, stable welding process, less spatters, well-shaped.
• Slow feed wire, function of ball cutting, easy arc ignition,
• Applicable thickness of 0.8mm or more, it's applicable for thinner welding.
• Easy-control and easy-carry, it's feasible and practical.
• Can apply stable welding use 0.6mm wire with 30A current, it's extensively applicated in many fields such as: auto, decoration, furniture etc.
• To save your cost, it can completely replace the tap welder.
• About Inverter Technology: The benefit of transistor bridge (INVERTER) TECHNOLOGY is its continuous current rectification. This allows for improved efficiency with power conversion exceeding 85%. The entire range of DECAPOWER welders feature inverter technology meaning they are 30% lighter, more compact and easier to use than ever.
  
  Feature
• Adopt advanced MOSFET technology, energy-saving.
• With PWM pulse width modulation technology, HF arc starting, stable current, the first choice for thin plate welding.
• With perfect over-current and over voltage protection function, safety and durable
•  Mainly used in welding carbon steel, stainless steel, alloy steel and copper.
• Accessories: TIG torch, electrode holder, earth clamp, brush/hammer, protective mask, carton box.

How to Choose welding machine

       CO2 Welding Machine/Welder 220/380V MIG/Mag Inverter Welding Machine

Whats is MAG welding machine

Carbon dioxide gas shielded welding: for metal welding wire as a melting electrode, inert gas (CO2) as a protective arc welding method. Referred to as MAG.CO2 arc welding is a highly efficient welding method to CO2 gas as a protective gas, relying on the arc between the wire and weldment to melt the metal gas welding method called CO2 welding. This welding method are used to wire automatic wire, large amount of metal, high production efficiency, quality and stability. Therefore, widely used at home and abroad, compared with other electric arc welding has the following characteristics:
1, high production efficiency CO2 arc welding penetration, strong penetration, and high melting rate of wire, so deposition speed, production efficiency can be higher than the manual arc welding 3 times.
2, low cost of welding CO2 welding costs only 40% -50% of the cost of submerged arc welding and manual arc welding.
3, low energy consumption CO2 arc welding and skin electrode compared to 3mm thick steel butt welds, electricity consumption per meter weld 30% lower, 25mm steel butt welding 60% lower electricity consumption.
4, wide range of applications No matter what position can be welded, the sheet can be welded to 1mm, the most thick and almost unlimited (multi-layer welding). And welding speed, small deformation.
5, strong anti-rust weld low hydrogen content strong crack resistance.
6, after welding without slag, arc operation easy to monitor and control, is conducive to the welding process mechanization and automation

Welding machine(IGBT Inverter technology/ CO₂)

• IGBT Inverter technology, current mode control, stably quality and
• Reliable quality, stable performance
• closed-loop feedback, constant voltage, Anti- net voltage fluctuation
• reactor control, stable welding process, less spatters, well-shaped.
• Slow feed wire, function of ball cutting, easy arc ignition,
• Applicable thickness of 0.8mm or more, it's applicable for thinner welding.
• Easy-control and easy-carry, it's feasible and practical.
• Can apply stable welding use 0.6mm wire with 30A current, it's extensively applicated in many fields such as: auto, decoration, furniture etc.
• To save your cost, it can completely replace the tap welder.
• About Inverter Technology: The benefit of transistor bridge (INVERTER) TECHNOLOGY is its continuous current rectification. This allows for improved efficiency with power conversion exceeding 85%. The entire range of DECAPOWER welders feature inverter technology meaning they are 30% lighter, more compact and easier to use than ever.
  
  Feature
• Adopt advanced MOSFET technology, energy-saving.
• With PWM pulse width modulation technology, HF arc starting, stable current, the first choice for thin plate welding.
• With perfect over-current and over voltage protection function, safety and durable
•  Mainly used in welding carbon steel, stainless steel, alloy steel and copper.
• Accessories: TIG torch, electrode holder, earth clamp, brush/hammer, protective mask, carton box.

How to Choose welding machine

Brass Gate Valve,Check Valve

Brass Gate Valve,Check Valve,Flanged Sewage Check Valve

Texoon Brass Works Co., Ltd. , http://www.china-brassvalves.com