Model NO.: TPP-2
Total Width: 2561mm
Total Height: 3500mm
Total Length: 4529mm
Gross Weight: 1200kg
Drive Mode: Hydraulic
Container Load: 9 Units/20ft Container; 18 Units/40ft Container
Surface Treatment: Powder Coating
Processing Method: Laser Cutting & Robotic Welding
Trademark: Mutrade Parking
Specification: CE / ISO9001
Origin: Qingdao, China
HS Code: 84289020
Model NO.: TPP-2
Total Width: 2561mm
Total Height: 3500mm
Total Length: 4529mm
Gross Weight: 1200kg
Drive Mode: Hydraulic
Container Load: 9 Units/20ft Container; 18 Units/40ft Container
Surface Treatment: Powder Coating
Processing Method: Laser Cutting & Robotic Welding
Trademark: Mutrade Parking
Specification: CE / ISO9001
Origin: Qingdao, China
HS Code: 84289020
Introduction
1. TPP-2 series of products are Valet parking equipment.Â
2. TPP-2 series of products are all hydraulic direct drive system.Â
3. The system has an advanced post sharing feature, by sharing the middle post to save money and space.Â
4. According to the different usage, there are 3Â models of TPP-2 available. They are TPP-2 (2 SUV), TPP-2 Li (1SUV 1Â Sedan), and TPP-2 SLi (2 Sedan).Â
5. Single stage cylinder option available to save cost.Â
6. The power pack is available from 110V-420V, single/3 phase.Â
7. The control power is 24V.Â
8. Both dynamic and static locks are available.Â
9. Both outdoor and indoor versions are available.Â
10. Electric lock release is available.Â
Features
1. By sharing column, the total width of the product have different figure.Â
2. If your ceiling height is more than 4.4meters, we could use single stage cylinder to cut cost for you.Â
3. The standard system is powder coated with zinc cover plate, and can be galvanized for outdoor use.Â
4. Mechanical lock on both sides for safety.Â
5. Photocell sensor available for electric lock release type to check under car and avoid trespass.Â
6 Sound &Â light alarm during lowering the system. (Optional)
7. Electric protection for power over load or under voltage.Â
8. Auto locking system for power cut as safety features.Â
9. Emergency stop button.Â
10. Explosion relief valve make sure hydraulic safety.Â
11. Balance chain for platform synchronization.Â
12. Cylinder direct drive.Â
13. Overhead beam for more stability (Optional, recommend to use when install independent unit)
14. Zinc cover plate used for water-proof.Â
Advantages:
1. TPP-2 Series products are 100% cut by Laser and more than 60% welded by robot.Â
2. Consumer product level finishing -Â We have the biggest and best powder coating line within the region and the finishing of our product is much better than the industry level.Â
3. Most reliable safety -Â We are offering the safest parking machine in the market, the equipment is built under the CE code and has more than 10 safety features to ensure safety of our clients.Â
4. Unique sharing feature -Â Our unique post sharing feature allows our clients to save cost and space during the installation.Â
5. Professional packing & delivery team - We have a very professional packaging and logistic team to ensure that our customers get the product damage free and unload easily.Â
6. Experience &Â life long support -Â We export most of the TPP products from China, and we have experience on the possible difficulties that you might face. Life long support would be provided to you free of cost during any such difficulty.Â
7. Fast and easy installation -Â With most of the parts pre-installed in the factory, it is very simple on install on site.Â
| TPP-2 Specifications |
| Mortise and tenon joint Structure (Patented) |
Yes |
| Hydraulic direct drive full travel cylinders improve 4 times safty rate than the regular chain driving system and reduce the maintence cost by half. |
Y |
| Two cylinder lifting design provide smooth operation and safety protection |
Y |
| Multilink structure combine all the paking spaces as a whole reduce the ground requiremnet, improve safety comapre with the single parking space |
Y |
| 3 locking position fasten the operation speed and make manual locking release more comfort to use |
Y |
| 17 locking position provide mechanical protection through all operation height |
Y |
| Hydraulic safety lock prevent the possible demage may caused by hose burst |
Y |
| Synchronization chain assure the lifting platform balance also make it possible for the lift to be installed on floor with slight incline. In the unlikely event of structure failure, synchronization chain will work as a safety device to holding failure until it is repaired. |
Y |
| Anti-slip corrugated deck protect both vehicle and driver from possible slip and deamage but still high-heel shoe friendly |
Y |
| 150% safety reserve on structure strength |
Y |
| Reduced requirement on floor and base suit different using condition |
Y |
| Thermal protection save motor from over heating and possible burn with low quality power supply. |
Y |
| Hydraulic relief valve limits maxmum hydraulic pressure to avoid over capacity of lift |
Y |
| Air break switch can automatically cut off the electric circuit when occur over load, short circuit, voltage drop. |
Y |
| Hold to run control button avoided user misoperation |
Y |
| 220V Control provide a easy power connection and reduce maintenance cost |
Y |
| Lockable master switch only permit authorized operator to be able to use lift |
Y |
| Upper limit switch postion the height of platform and control the platform highest position |
Y |
| Car detection photocell 100% protect the ground level car even with misoperation |
Y |
| Anti toe function with a lower limit sensor to protect operator's toe and foot by stoping platform before it reach floor level then request operator confirm to lower to the ground. |
Y |
| 2.7T capacity for Suvs and cars |
Y |
| Outdoor version available with galavernization for longer machine life |
Y |
| Smooth and quiet operation with hydraulic system |
Y |
| Push up cylinder for longer lift of seal pack |
Y |
| Telescoping cylinder for lower ceiling height requirement |
Y |
| Polyurethane hoses for hydraulic make layout easier. |
Y |
| Fast operation speed takes less waiting time |
Y |
| Instant double parking space fully use the parking space in a limited place |
Y |
| Shared column to save precious space for your car |
Y |
| More space for door opening when parked back in |
Y |
| Hot-galvanize platfrom guarantee a long lift of the deck even with water or snow affect |
Y |
| Rain or melt water can only exit from the end of the platform to save your cloth from drop water |
Y |
| Automatic lock release control during lower down operation make lift can be used by customer with limited experience. |
Y |
| Extensive information installation manual and video help you install easily |
Y |
| No lifting chain or pulley need to be maintained |
Y |
| Project packing with special design for fast installation |
Y |
| Minimum electrical control for lower installation cost |
Y |
| Run over ramp for possible trans pass installation |
Y
 |
| TPP-2 series |
| Parking vehicles |
2 |
| Lifting speed (seconds) |
<55 |
| Power (hydraulic power in Kw) |
2.2 |
| Drive mode |
Hydraulic cylinder direct drive |
| Operation mode |
Key switch |
| Lock releasing mode |
24V electrical lock release |
| TPP-2 Standard model |
| Lifting capacity (kg) |
2700 |
| Lifting height (mm) |
2100 |
| Anti-falling safety lock postion |
17 |
| TPP-2 Li |
| Lifting capacity (kg) |
2300 |
| Lifting height (mm) |
2100 |
| Anti-falling safety lock postion |
3 |
| TPP-2 SLi |
| Lifting capacity (kg) |
1800 |
| Lifting capacity (kg) |
1800 |
| Anti-falling safety lock postion |
3 |
Introduction
1. TPP-2 series of products are Valet parking equipment.Â
2. TPP-2 series of products are all hydraulic direct drive system.Â
3. The system has an advanced post sharing feature, by sharing the middle post to save money and space.Â
4. According to the different usage, there are 3Â models of TPP-2 available. They are TPP-2 (2 SUV), TPP-2 Li (1SUV 1Â Sedan), and TPP-2 SLi (2 Sedan).Â
5. Single stage cylinder option available to save cost.Â
6. The power pack is available from 110V-420V, single/3 phase.Â
7. The control power is 24V.Â
8. Both dynamic and static locks are available.Â
9. Both outdoor and indoor versions are available.Â
10. Electric lock release is available.Â
Features
1. By sharing column, the total width of the product have different figure.Â
2. If your ceiling height is more than 4.4meters, we could use single stage cylinder to cut cost for you.Â
3. The standard system is powder coated with zinc cover plate, and can be galvanized for outdoor use.Â
4. Mechanical lock on both sides for safety.Â
5. Photocell sensor available for electric lock release type to check under car and avoid trespass.Â
6 Sound &Â light alarm during lowering the system. (Optional)
7. Electric protection for power over load or under voltage.Â
8. Auto locking system for power cut as safety features.Â
9. Emergency stop button.Â
10. Explosion relief valve make sure hydraulic safety.Â
11. Balance chain for platform synchronization.Â
12. Cylinder direct drive.Â
13. Overhead beam for more stability (Optional, recommend to use when install independent unit)
14. Zinc cover plate used for water-proof.Â
Advantages:
1. TPP-2 Series products are 100% cut by Laser and more than 60% welded by robot.Â
2. Consumer product level finishing -Â We have the biggest and best powder coating line within the region and the finishing of our product is much better than the industry level.Â
3. Most reliable safety -Â We are offering the safest parking machine in the market, the equipment is built under the CE code and has more than 10 safety features to ensure safety of our clients.Â
4. Unique sharing feature -Â Our unique post sharing feature allows our clients to save cost and space during the installation.Â
5. Professional packing & delivery team - We have a very professional packaging and logistic team to ensure that our customers get the product damage free and unload easily.Â
6. Experience &Â life long support -Â We export most of the TPP products from China, and we have experience on the possible difficulties that you might face. Life long support would be provided to you free of cost during any such difficulty.Â
7. Fast and easy installation -Â With most of the parts pre-installed in the factory, it is very simple on install on site.Â
| TPP-2 Specifications |
| Mortise and tenon joint Structure (Patented) |
Yes |
| Hydraulic direct drive full travel cylinders improve 4 times safty rate than the regular chain driving system and reduce the maintence cost by half. |
Y |
| Two cylinder lifting design provide smooth operation and safety protection |
Y |
| Multilink structure combine all the paking spaces as a whole reduce the ground requiremnet, improve safety comapre with the single parking space |
Y |
| 3 locking position fasten the operation speed and make manual locking release more comfort to use |
Y |
| 17 locking position provide mechanical protection through all operation height |
Y |
| Hydraulic safety lock prevent the possible demage may caused by hose burst |
Y |
| Synchronization chain assure the lifting platform balance also make it possible for the lift to be installed on floor with slight incline. In the unlikely event of structure failure, synchronization chain will work as a safety device to holding failure until it is repaired. |
Y |
| Anti-slip corrugated deck protect both vehicle and driver from possible slip and deamage but still high-heel shoe friendly |
Y |
| 150% safety reserve on structure strength |
Y |
| Reduced requirement on floor and base suit different using condition |
Y |
| Thermal protection save motor from over heating and possible burn with low quality power supply. |
Y |
| Hydraulic relief valve limits maxmum hydraulic pressure to avoid over capacity of lift |
Y |
| Air break switch can automatically cut off the electric circuit when occur over load, short circuit, voltage drop. |
Y |
| Hold to run control button avoided user misoperation |
Y |
| 220V Control provide a easy power connection and reduce maintenance cost |
Y |
| Lockable master switch only permit authorized operator to be able to use lift |
Y |
| Upper limit switch postion the height of platform and control the platform highest position |
Y |
| Car detection photocell 100% protect the ground level car even with misoperation |
Y |
| Anti toe function with a lower limit sensor to protect operator's toe and foot by stoping platform before it reach floor level then request operator confirm to lower to the ground. |
Y |
| 2.7T capacity for Suvs and cars |
Y |
| Outdoor version available with galavernization for longer machine life |
Y |
| Smooth and quiet operation with hydraulic system |
Y |
| Push up cylinder for longer lift of seal pack |
Y |
| Telescoping cylinder for lower ceiling height requirement |
Y |
| Polyurethane hoses for hydraulic make layout easier. |
Y |
| Fast operation speed takes less waiting time |
Y |
| Instant double parking space fully use the parking space in a limited place |
Y |
| Shared column to save precious space for your car |
Y |
| More space for door opening when parked back in |
Y |
| Hot-galvanize platfrom guarantee a long lift of the deck even with water or snow affect |
Y |
| Rain or melt water can only exit from the end of the platform to save your cloth from drop water |
Y |
| Automatic lock release control during lower down operation make lift can be used by customer with limited experience. |
Y |
| Extensive information installation manual and video help you install easily |
Y |
| No lifting chain or pulley need to be maintained |
Y |
| Project packing with special design for fast installation |
Y |
| Minimum electrical control for lower installation cost |
Y |
| Run over ramp for possible trans pass installation |
Y
 |
| TPP-2 series |
| Parking vehicles |
2 |
| Lifting speed (seconds) |
<55 |
| Power (hydraulic power in Kw) |
2.2 |
| Drive mode |
Hydraulic cylinder direct drive |
| Operation mode |
Key switch |
| Lock releasing mode |
24V electrical lock release |
| TPP-2 Standard model |
| Lifting capacity (kg) |
2700 |
| Lifting height (mm) |
2100 |
| Anti-falling safety lock postion |
17 |
| TPP-2 Li |
| Lifting capacity (kg) |
2300 |
| Lifting height (mm) |
2100 |
| Anti-falling safety lock postion |
3 |
| TPP-2 SLi |
| Lifting capacity (kg) |
1800 |
| Lifting capacity (kg) |
1800 |
| Anti-falling safety lock postion |
3 |
Nissan Water Jet Loom
Nissan Water Jet Loom
Hicas Textiles Machinery Co., Ltd. , http://www.qdrapierloom.com