Beijing Metrology Institute of traffic energy metering equipment testing technology research and development project was accepted
Goodsense Cushion Tire LPG&Gasoline Forklift advantages:
- Shorter wheelbase with smaller turning radius with more flexibility.
- Cushion tire to work at smooth pavement, does not require too much pavement friction
- for indoor works with less noise and less emission in contrast with diesel forklift
- EPA tier 4 compliance
General
Model
FY20D1
Power Type
LPG
Load Capacity
kg
2000
Load centre
mm
500
Tyre
Tyre
Cushion Tyre
Front Tyre
21x7x15
Rear Tyre
16(1/4)x6x11(1/4)
Overall Dimension
Lift Height
mm
3000
Fork Size
L×W×T
mm
1070*120*40
Mast Tilt Angle
F/R
.
6/12
Mast Lowered Height
mm
2070
Mast Extended Height(with backrest)
mm
4070
Length to face of fork(Without fork)
mm
2360
Overall Width
mm
1110
Cabin Height
mm
2080
Loading Plane Height
mm
3000
Application Area:
1.Warehouse
2.Port
3.Factory
4.Distribution Center
5.Logistics
If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.
Cushion Tire LPG&Gasoline Forklift Gasoline Forklift,Forklift With Quadruple Mast,Cushion Tire Lpg Forklift ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.dieselforklift.nl
Director Zhou Yuan of Beijing Municipal Traffic Committee, Deputy Director Liu Yong of Beijing Municipal Quality Supervision Bureau, Deputy Director Liu Ying of Beijing Traffic Energy Conservation and Emission Reduction Center, and Vice President Zhang Ke of Metrology Institute attended the acceptance meeting. The acceptance group consists of experts from the Municipal Development and Reform Commission, the Municipal Industrial Design Institute, the Municipal Public Transport Group, and the Municipal Communications Commission Information Center.
With the transformation and adjustment of the economic development structure of Beijing, and the rapid development of urbanization and motorization, the transportation industry, which currently accounts for 23% of the city's total energy consumption, has become one of the three major industries for energy conservation and emission reduction in the city. . The situation of energy conservation and emission reduction in transportation is very urgent. According to the "Beijing Clean Air Action Plan 2013-2017" and "The Office of the State Council issued and issued the "2014-2015 Action Plan for Energy-saving and Emission-reducing Low-carbon Development"" on "Strengthening Operation Monitoring and Accelerating Energy Consumption of Key Energy-using Units Online The construction requirements of the monitoring system construction, the municipal traffic committee plans to establish the “Statistics and Monitoring Platform for Energy Conservation and Emission Reduction in the Transportation Sector in Beijing (Phase II)†in public transportation, railways, taxis, tourism, freight transportation, interprovincial, suburban, social vehicles, etc. The industry carried out the transformation of measurement equipment to further improve the construction of the measurement and monitoring system for the energy consumption of the operating vehicles in the transportation industry, and improve the fine management level of energy-saving and emission-reduction of transportation.
With the support of the Beijing Municipal Bureau of Quality Supervision and the leadership of the Municipal Traffic Commission, the Metropolitan Institute of Energy Energy has taken full advantage of the guidance and support of standards and measurement, actively participated in the construction and planning of the energy measurement standard system for the transportation industry in Beijing, and assumed responsibility for the transportation industry. Vehicle energy metering equipment detection technology research and development task. The project was established in May 2015 with a research and development cycle of two years. It is one of the key tasks of the Metropolitan Bureau of Quality Supervision in 2016. It mainly includes research on the technical requirements and testing methods for on-board energy measuring instruments, research and development of detection devices and software systems, and planning for the measurement and scientific research needs of the transportation industry in the next three years. The project involves standards and metrology research in various fields such as vehicle energy, satellite positioning, vehicle operating conditions, and mobile communications. The Institute of Energy and Energy, Beijing University of Technology, China Aerospace Science and Industry Corporation, China Aerospace Technology Co., Ltd., etc. Units participate in the research work of the project.
Experts at the conference unanimously agreed that the research results should be promoted and applied in the transportation field as soon as possible to provide support for the improvement of the quality of on-board energy consumption measurement equipment for operating vehicles and for the promotion of testing and certification of on-board measurement equipment.
(Original title: Municipal Metrology Institute undertook the acceptance inspection of the Energy Measurement Research Project of the Municipal Communications Commission.)
