3D Foam Panel Wire Mesh Welded Machine

November 19 04:16:03, 2020

Model NO.: KY-3D-200
Color: According to Customer′s Request
Usage: Making Welded Wire Mesh
Life Time: More Than 10 Years
Package: According to The Customer Request
Trademark: KaiYe
Specification: ISO/ SGS
Origin: He Bei an Ping
HS Code: 84633000
3D panel machine 
 
3D panel adopts 3-dimension spatial steel wire mesh frame as the framework, anti-flaming polystyrene (EPS) foam panel as heat protective core layer. External layer of the wall building material is sprayed with the pea gravel concrete or slush. 
 
 


The 3D panel machine, adopts touching screen control system. The power is pneumatic and step motor. It could insert and oblique cutting wire, fllatten mesh and foam board automatically, and the finished product is a steel polystyrene splint. The production line has high automatic and production capacity. Low lack welding rate, high intensity and even welding point, the mesh sheet is also flat and the production cost is very low.



 
1. The upper wire mesh and lower wire mesh were welded with slanted steel wire to form a product---3D Panel. kaiye  3D panel machine can also produce the single-sided 3D Panel which is widely used in external wall insulation system in China market (I. E. 3D Panel has only one side wire mesh); 
2. PLC, touch screen, specially designed chain system; 
3. High productivity, sparse inserting panels can reach 700 SQM per 8 hours. 
4. It can produce two types of 3D Panels(sparse 3D panel and dense 3D panel) 
5. Low lack welding rate, even welding strength, excellent quality and low production cost. 
6. Design special machines by requirements 
7. Labors: 3-5


Rated electrical power 75KVA
Input voltage AV380V  50HZ
Air source allocation 3 Cubic meter/Min   0.6MPa
Applicable range Core panel thickness 50mm-100mm
Truss wire configuration Single or double sided mesh ,different densities of truss wires
Production standard Standard Sandwich  panel length 3000mm
width 1200mm
nonstandard sandwich panel The length according to your requirement ≤4500mm
Material characteristic Welded wire material 2.0mm-3.0mm cold-drawing low-carbon steel wire
Core panel material Anti-flaming EPS board & XPS board
Gridding space of mesh 50mm*50mm
Lack welding rate ≤5%
Welding strength (single point)≥330N
Overall dimension length 13500mm
width 1800mm
height 1700mm
Weight 4000kg


3D Foam Panel Wire Mesh Welded Machine
3D Foam Panel Wire Mesh Welded Machine
3D Foam Panel Wire Mesh Welded Machine


If you have any interest in wire mesh welding machine ,please feel free to contact with us.

LED tube light is application of a new type of LED lighting light source on the basis of traditional tube light of the development of improved products, compared with traditional tube light has the following advantages: energy saving, low carbon, long life, good color rendering and fast response.LED tube light, a design more beautiful light, installation to keep building decoration of the overall unity and perfect, does not destroy the set of lamps and lanterns, light hidden inside the building decoration, light source is not exposed, no glare, the visual effect of soft and uniform.

P-n junction terminal voltage constitute a certain potential barrier, when the positive bias voltage drop time base, P and N the majority carrier diffusion to the other party.Due to the electron mobility is much bigger than hole mobility, so there will be a large number of electronic spreading P area, constitute of P area of minority carrier injection.These electrons and valence with hole composite, composite when the energy in the form of light energy to release out.This is the principle of PN junction glow.

Led Down Light

Led Down Light,Led Down Light Cover,Led Downlight Ceiling Down Light,Led Ceiling Down Light

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com