Features: - Inductance can be ignored due to rectifier control. With same output current,the power factor of the welder is greatly improved, up to 0.8-0.9. -Â Â Three-phase secondary rectification welding machine has the advantages of having no affect in the balance of external electricity net.
Control system: Adopting German technology. Components include Mitsubishi PLC, SMC pneumatic components, OMRON induction switch, to ensure the stability of the whole machine. Drive system: AC servo motor drive ensures accurate and stable operation. Conductive system: Conductive shaft using silver conductive tile rotary device which results in good conductivity. Pressure system: Pressurization systems are uniformly regulated to transfer pressure. The related components are made in Taiwan or Japan. Cooling system: This machine adopts inner cooling system, which not only makes the work environment clean and tidy, but also effectively ensures the safety of working machine. Welding wheel & Adjusting system: Welding wheels are made from high quility Copper Alloy  from our company which are durable in use and have excellent conductivity. At the same time the machine is equipped with welding wheel adjusting system, which helps surface of welding wheel to be smooth.
Technical Parameters:
Â
Unit
Parameter
Remarks
Rated capacity
KVA
3*100
3 phase secondry commutator
Primary voltage
V
380
Â
Frequency
Hz
50
Â
Persistency rate of rated load
%
50
Â
Secondary voltage
V
5.4,6.3
Â
Maximum welding thickness of workpiece
Mm
2.5+2.5
Â
Rated welding thickness
Mm
2+2
Â
Stretching-length of electrode arm
Mm
≤1200
Effective length
Welding oil Tank size
Minimum width
Mm
200
Â
The minimum margin of welding line
Mm
120
Â
Working stroke of upper welding wheel
Mm
20-60
Â
Working stroke of down welding wheel
Mm
Fixed
Â
Welding speed
M/min
1.2~3.0
Â
Maximum working pressure
N(kgf)
5000
Â
Pressure of compressed air of air source
MPa(kgf/cm²)
0.5
Â
Consumption of compressed air
M³/h
6.0
Natural condition
Consumption of cooling water
L/h
2400
Â
Motor power
Kw
0.55+0.55
2 motors
About Us:
1. Payment: Acturally, payment would be preferred: Normally we choose in T/T, usually is 40~50% deposit and pay the balance before shipment.L/C.
2. Delivery time: The goods need 90 working  days to be made after receive deposit.
3. Why choose us? Â We are China Leading manufacturer. We are confident that with our experience in welding machine etc. Quick delivery time, excellent quality and comprehensive superior service we can give our customers complete satisfaction.Â
 For large order, engineer can be sent to your country for on-site mainternace instructions.
Â
4.Our 100% Promise: 1. 24 hours online service. 2. We always say FINE to my customer. 3. The above product photos are coming from main production. 4. Thanks and the first cooperation to be expected.
For more information, please visit our website.(www.jywuxing.com)Welcome to visit our factory. we are sincerely want to start business with each customer. Enquiry are welcomed.
Â
Our Services
1.Your inquiry related to our product &Â price will be replied within 24 hours
2.Well-trained &Â experienced staff are to answer all your inquiries in English
3.Working time: 8:00am ~17:00pm, Monday to Friday. (UTC+8)
4.Customized solution &Â perfect after-sale service
5. For large order, engineer can be sent to your country for on-site mainternace instructions.
6.Our advantage:1.Competitive price  2.Good quality  3.Timely delivery  4.New model launch yearly Â
                              5.Own manufacturing  6.own quality controlÂ
Contact us: Tel:Â Â +86-510-86027183 Mob:Â Â +86-13921230558 Fax:Â Â +86-510-86027228 Web: www.jywuxing.com
Features: - Inductance can be ignored due to rectifier control. With same output current,the power factor of the welder is greatly improved, up to 0.8-0.9. -Â Â Three-phase secondary rectification welding machine has the advantages of having no affect in the balance of external electricity net.
Control system: Adopting German technology. Components include Mitsubishi PLC, SMC pneumatic components, OMRON induction switch, to ensure the stability of the whole machine. Drive system: AC servo motor drive ensures accurate and stable operation. Conductive system: Conductive shaft using silver conductive tile rotary device which results in good conductivity. Pressure system: Pressurization systems are uniformly regulated to transfer pressure. The related components are made in Taiwan or Japan. Cooling system: This machine adopts inner cooling system, which not only makes the work environment clean and tidy, but also effectively ensures the safety of working machine. Welding wheel & Adjusting system: Welding wheels are made from high quility Copper Alloy  from our company which are durable in use and have excellent conductivity. At the same time the machine is equipped with welding wheel adjusting system, which helps surface of welding wheel to be smooth.
Technical Parameters:
Â
Unit
Parameter
Remarks
Rated capacity
KVA
3*100
3 phase secondry commutator
Primary voltage
V
380
Â
Frequency
Hz
50
Â
Persistency rate of rated load
%
50
Â
Secondary voltage
V
5.4,6.3
Â
Maximum welding thickness of workpiece
Mm
2.5+2.5
Â
Rated welding thickness
Mm
2+2
Â
Stretching-length of electrode arm
Mm
≤1200
Effective length
Welding oil Tank size
Minimum width
Mm
200
Â
The minimum margin of welding line
Mm
120
Â
Working stroke of upper welding wheel
Mm
20-60
Â
Working stroke of down welding wheel
Mm
Fixed
Â
Welding speed
M/min
1.2~3.0
Â
Maximum working pressure
N(kgf)
5000
Â
Pressure of compressed air of air source
MPa(kgf/cm²)
0.5
Â
Consumption of compressed air
M³/h
6.0
Natural condition
Consumption of cooling water
L/h
2400
Â
Motor power
Kw
0.55+0.55
2 motors
About Us:
1. Payment: Acturally, payment would be preferred: Normally we choose in T/T, usually is 40~50% deposit and pay the balance before shipment.L/C.
2. Delivery time: The goods need 90 working  days to be made after receive deposit.
3. Why choose us? Â We are China Leading manufacturer. We are confident that with our experience in welding machine etc. Quick delivery time, excellent quality and comprehensive superior service we can give our customers complete satisfaction.Â
 For large order, engineer can be sent to your country for on-site mainternace instructions.
Â
4.Our 100% Promise: 1. 24 hours online service. 2. We always say FINE to my customer. 3. The above product photos are coming from main production. 4. Thanks and the first cooperation to be expected.
For more information, please visit our website.(www.jywuxing.com)Welcome to visit our factory. we are sincerely want to start business with each customer. Enquiry are welcomed.
Â
Our Services
1.Your inquiry related to our product &Â price will be replied within 24 hours
2.Well-trained &Â experienced staff are to answer all your inquiries in English
3.Working time: 8:00am ~17:00pm, Monday to Friday. (UTC+8)
4.Customized solution &Â perfect after-sale service
5. For large order, engineer can be sent to your country for on-site mainternace instructions.
6.Our advantage:1.Competitive price  2.Good quality  3.Timely delivery  4.New model launch yearly Â
                              5.Own manufacturing  6.own quality controlÂ
Contact us: Tel:Â Â +86-510-86027183 Mob:Â Â +86-13921230558 Fax:Â Â +86-510-86027228 Web: www.jywuxing.com
3 booms drilling rig for underground tunnel construction purpose,the tunnel machine is very popular in Philippines formation construction, as well as Indonesia,Pakistan,Japan capital construction.
More powerful driller,brand drifter assembly,support your construction company name printed on the body of jumbo drilling rig.
